Heavy Duty Low Noise 100 Meshes Stainless Steel Wire Mesh Weaving Loom For Stainless Wire Mesh Weaving
Hebei Jinglian Machinery Maunfacture Co.Ltd is a stainless steel wire mesh weaving machine manufature with more than 30 years wire mesh producinst oil on each part shall be swept away before trial operation.
The worm gear box shall be filled with oil, and the oil shall be full over the gears, and each lubricating cup, oil hole, gear pair, worm gear pair, sliding pair and other lubricating part shall be sufficiently oiled.
The motor and the housing shall be correctly earthed.g experiences.
Our stainless steel wire mesh weaving machine is widely used in Chinease market and export to India at the same time.
We have fully automatic and semi-automatic machine .
The weaving machine shall be transported and handled by a hoisting apparatus.
Main features
1. High adaptability to metal wire: Apply to imported and domestic metal wires
2. Large adjusting range: Weave 14-400 mesh square hole mesh or 2600 mesh special mesh with various lines, such as plain weave, twilled weave, satin weave, taper contrast thick mesh weaving, superior to other models
3. It adopts shuttleless straight line weft insertion weaving and mechanical automatic let-off and take-up, has small opening amount and smooth wire side, can weave microgroove mesh without bright spot or bright channel and produce high-grade screen mesh, and conforms to national standard.
4. Low center of gravity, good stability, low noise, less energy consumption, high efficiency
The technical parameters are shown in the Table below.
| TYPE | ZWJ-1300D | ZWJ-1600D | ZWJ-2100D |
| MESH SIZE | 20-140mesh/inch | 20-140mesh/inch | 20-140mesh/inch |
| WIRE DIAMETER | 0.10-0.35mm | 0.10-0.35mm | 0.10-0.35mm |
| BEATING-UP FREQUENCY | 70 r/min | 70 r/min | 70 r/min |
| MESH WIDTH | 1300mm | 1600mm | 2100mm |
| MOTOR POWER | 2.2kw | 2.2kw | 2.2kw |
| OVERALL SIZE | 3.0m*2.8m*1.4m | 3.0m*3.1m*1.4m | 3.0m*3.6m*1.4m |
Operation
The weaving machine can be started up and stopped at any running position.
a fault of weft broken or warp broken, the weaving machine will be automatically stopped and the red/green light will give an indication. The weaving machine can be brought back into normal operation after the fault is removed, the STOP button is pressed down, and the indicator is turned off. If the indicator does not turn off when the STOP button is pressed down, and the weaving machine can not be brought back into normal operation even by pressing down the FORWARD button, it means the fault hasn't been
|
|
Heavy Duty Low Noise 100 Meshes Stainless Steel Wire Mesh Weaving Loom For Stainless Wire Mesh Weaving Images
|
